ORIS FLEX PACK // WEB 3.4 - Hotfixes ____________________________________ Version 3.4.0.11 ADDITIONS #61324 - Roland VSi printers: Added new print resolution '1440x1440 dpi (32pass, 1bit)' for single-pass printing. #60806 - Supports for the inkjet printer VersaUV LEF2-300 from Roland DG for proofing continuous tone data. - 5 colors (ECO-UV4 ink): - CMYK + white + 2x varnish - Maximum resolution: 1440 x 720 dpi - Maximum media width and length:770 x 330 mm There are no Windows printer drivers available for Roland printers. Do the following to create a generic TCP/IP printer: - Turn the printer on and make sure it is accessible on the network. - If Windows 7 is used, select Devices and Printers from the Windows Start menu. - If Windows 8 or 10 is used, right-click the Windows Start icon and select Control Panel. Then click on (View) Devices and printers. - Click Add a printer. - If Windows 8 or 10 is used, click on The printer that I want isn't listed. - Select Local printer (Windows 7) or Add a local printer or network printer with manual settings (Windows 8 and 10). - Select Create a new port and Standard TCP/IP Port. - Enter the printer’s IP address. - If the printer is offline or unreachable, you are requested to specify the device type. Leave the default settings Standard and Generic Network Card. - Select the printer manufacturer Generic and the printer Generic/Text Only. - Enter the printer name Roland LEF2-300. Note: Make sure to use exactly this spelling. The program uses the Windows printer name to identify the ink set installed in the printer. Version 3.4.0.10 #61498 - Epson SC-Px500: Fixed a ScreenDot printing error that occurred in some particular cases. In addition, a new ORIS Color Tuner//Web plug-in named 'CP_ESCP7595_11_1.exe' must be installed for these printers. This plug-in can be downloaded from the CGS website http://www.cgs-oris.com/. #61412 - Epson SC-Px500: Added print resolution '2400x1200 dpi' for printing methods 'ScreenDot' and 'ScreenDot Plus'. #61521 - Updated Japanese language files. #61339 - It is now possible to install the program even if another program is locking 'winhot.exe'. Version 3.4.0.9 #60490 - Epson SC-Px500: Printing methods 'ScreenDot' and 'ScreenDot Plus' are supported now. #60669 - Epson SC-Px500: Added print resolution 'Super Fine 1200x1200 dpi, 1200 dpi data resolution' and 'Super Fine 1200x1200 dpi Detail, 1200 dpi data resolution'. #61334 - Fixed an error that occurred when using gradation curves with the 'Step' option set to 'Min'. #61300 - Mutoh ValueJet-628MP: Centered printing works as expected now. #61335 - Mutoh ValueJet-628MP: The following color modes are available now: - CMYK - CMYK, Light Cyan, Light Magenta - CMYK, Light Cyan, Light Magenta, White - White Version 3.4.0.8 #61263, #60911 - We fixed a bug that caused automatic print head cleaning to be started inadvertently. #61006 - Mutoh VJ Series: In reverse printing mode, jobs are now mirrored as expected. Version 3.4.0.7 #61143 - It is now possible to delete a queue that has an apostrophe in its name. #61169 - A problem deleting jobs following a machine crash e.g. after a powercut has been solved. Version 3.4.0.6 ADDITIONS #60038 - Support for Epson large-format printers SureColor SC-P7500 and SC-P9500 for proofing continuous tone data. - 12 colors (pigment ink): Green, Orange, Violet, Vivid Light Magenta, Vivid Magenta, Yellow, Light Cyan, Cyan, Matte Black, Photo Black, Gray, Light Gray - Maximum resolution: 2400 x 1200 dpi - Maximum media width: 24 inch (610 mm) for SC-P7500 and 44 inch (1118 mm) for SC-P9500 Important Notes Install the original Epson printer driver for these printers as well as the ORIS Color Tuner//Web plug-in CP_ESCP7595_10_1.exe. This plug-in is available on the installation CD and can also be downloaded from our website. When using ORIS proofing paper, select the setting 'Epson Proofing Paper White Semimatt' on the printer’s control panel. The X-Rite spectrophotometer embedded in these printers is supported when printing on roll paper. This device can be used for calibration, color matching, proof certification and the creation of reference printer profiles. The embedded measurement device can be used for these functions only. You cannot measure test charts inserted manually into the printer. #60736 - Measurement device i1 Pro 3 (standard aperture) is now implemented. Measurement modes M0, M1, M2 and M3 are supported. Version 3.4.0.5 BUG FIX #58455 - E-mail notification now also works for email servers using a secure protocol e.g. Gmail. #60556 - Spot color correction: Fixed an error that occurred when importing spot colors from CxF/X-4 data. #60631 - ORIS Soft Proof: New plug-in for Macintosh computers (Version 3.0.9 Build 1) available at www.cgs-oris.com. Adobe Acrobat now uses the currently set monitor profile. ADDITIONS #58672 - Support for ValueJet-1617H and ValueJet-1627MH from Mutoh for proofing continuous tone data. - Ink technology: Multipurpose ink (MP31 ink) - Inks: C, M, Y, K, light cyan, light magenta, white - Maximum resolution: 1440 dpi - Maximum media width: 1625 mm It is sufficient to install the original Mutoh printer driver for these printers. It is not necessary to install any ORIS Color Tuner//Web plug-in. Enter the printer name exactly as shown below. MUTOH VJ-1617H MUTOH VJ-1617H CMYKWH MUTOH VJ-1627MH MUTOH VJ-1627MH CMYKWH MUTOH VJ-1627MH CMYKLCLM MUTOH VJ-1627MH CMYKLCLMWH Note: Make sure the printer name is spelt exactly as indicated. The program uses the Windows printer name to identify the ink set installed in the printer. Version 3.4.0.4 BUG FIX #60815 - Disabling the display of spot color separations in the Print Job Editor works as expected now. ADDITIONS #60258 - New PANTONE Solid Coated/Uncoated V4 and Pantone Color Bridge Coated/Uncoated V4 libraries. The following PANTONE spot color libraries are additionally installed now: PANTONE Solid Coated-V4.osc PANTONE Solid Coated-V4_M0.lab PANTONE Solid Coated-V4_M1.lab PANTONE Solid Coated-V4_M2.lab PANTONE Solid Coated-V4_M3.lab PANTONE Solid Uncoated-V4.osc PANTONE Solid Uncoated-V4_M0.lab PANTONE Solid Uncoated-V4_M1.lab PANTONE Solid Uncoated-V4_M2.lab PANTONE Solid Uncoated-V4_M3.lab PANTONE Color Bridge Coated-V4.osc PANTONE Color Bridge Coated-V4_M0.lab PANTONE Color Bridge Coated-V4_M1.lab PANTONE Color Bridge Coated-V4_M2.lab PANTONE Color Bridge Coated-V4_M3.lab PANTONE Color Bridge Uncoated-V4.osc PANTONE Color Bridge Uncoated-V4_M0.lab PANTONE Color Bridge Uncoated-V4_M1.lab PANTONE Color Bridge Uncoated-V4_M2.lab PANTONE Color Bridge Uncoated-V4_M3.lab These files reside in the installation directory under '…\Program Files\CGS\Common Files\CC\'. #60310 - Various test charts for the new 'i1Pro 3 Plus' device are installed under '…\CGS\ORIS FLEX PACK WEB\ORIS Flex Pack\Testcharts\EyeOne Pro3 Plus\'. Linearization test charts: Color 21 Step i1 Pro 3 Plus.pdf Color 21Step 6clr Linearization i1 Pro 3 Plus.pdf Color 21Step 7clr Linearization i1 Pro 3 Plus.pdf Calibration and color matching test charts: ECI2002 CMYK i1 Pro 3 Plus.pdf IT8.7-4 CMYK i1 Pro 3 Plus.pdf MC 6-Color CMYK-OrGr i1 Pro 3 Plus.pdf MC 7-Color CMYK-OrGrVi i1 Pro 3 Plus.pdf TC3.5 CMYK i1 Pro 3 Plus.pdf There is also a reference file for every test chart. It has the same name and the file extension 'txt'. Version 3.4.0.3 ADDITIONS #57674 - Support for EPSON SureColor SC-T5400 and SC-T3400 printers for Continuous Tone printing method - Ink technology: Ultrachrome® XD2 - Inks: black, cyan, yellow, magenta - Maximum resolution: 2.400 x 1.200 dpi - Maximum roll width: 36 inch (91.4 cm) Please use the Windows printer driver for these printers. Enable 'Windows Driver' on the 'Driver' tab of the queue's 'Settings' dialog. On the same tab, make sure 'Save roll paper' is disabled. Enable this option in the settings provided by the Windows printer driver. #58671 - Support for 8-channel desktop printer ValueJet-628MP from Mutoh for proofing continuous tone data - Ink technology: Multipurpose ink (MP31 ink) - Inks: C, M, Y, K, light cyan, light magenta, white - Maximum resolution: 1440 dpi - Maximum media width: 630 mm It is sufficient to install the original Mutoh printer driver for this printer. It is not necessary to install an ORIS Color Tuner//Web plug-in. Enter the printer name exactly as shown below. MUTOH VJ-628MP MUTOH VJ-628MP CMYKWH MUTOH VJ-628MP CMYKLCLM MUTOH VJ-628MP CMYKLCLMWH Note: Make sure the printer name is spelt exactly as indicated. The program uses the Windows printer name to identify the ink set installed in the printer. Version 3.4.0.2 #60666 - A login screen is no longer displayed on program start for computers with an Asian Windows system. #60639 - Epson SC-Px000 series with embedded spectrophotometer: Various bug fixes for fetching calibration data from printer. Version 3.4.0.1 #60567 - A login screen was displayed on program start under certain conditions. This has been fixed. #60551 - Fixed a bug that occurred when exporting print queues on Turkish operating systems.